A squire showmaster, it's all pointy and reverse head-stocky and I think this ones going to need a floyd rose fitting! So black floyd or chrome? (the finish will not be staying black or at least not the current black!)
Last year i bought, from eBay, a 'project' guitar.
That is a guitar that has seen better times in need of some improving.
The one I bought was a Squire Stratocaster, that had been poorly refinished in a very vibrant yellow.
When it arrived I was not expecting much, the yellow was indeed lurid, but much to my surprise it played fairly well, so well in fact that i took it with me to my local open mic night.
I also replaced the nut with a graphite one, leveled, dressed, and polished the frets, lightly sanded the back of the neck, refitted the neck- (sorting out the pitch whilst i was at it). On the electronics front, i replaced the pick ups with some hand wound high out-put ones i found on eBay, and rewired the whole thing, including a chromecaster style selector in place of the second tone pot (I say chromecaster style, as, whilst mine does the same job, I can't guarantee its exactly the same - I reverse engineered the chrome caster based on the instillation instructions and the out put switching tables).
To fit the chromecaster i first had to remove a little material from the control cavity- i added copper earthing tape to the cavety whilst i was there!
Finally, on a cosmetic whim i swapped the original single ply white pick guard for a 3 ply black one.
Images for this post :
I Managed to get a look at the guitarists pedal board - nice! (Poor photography - but it was LATE!)
Images for this post :
